glucose syrup plant manufacturers in mexico
Release Time：2020-12-22 16:58Author：sd888Source：未知
Any questions about the product can be communicated with us at any time!
Single effect evaporator system
Single effect evaporator system Introduction
The main function of single effect is get more higher density of glucose syrup. Usually from 80-84%, according to different customer different requirement.
Technical parameter of Single effect evaporator system
Model Size/m3 Power/KW Remark
GS-20 15 3 Stainless steel with thermal insulation
GS-30 23 3 Stainless steel with thermal insulation
GS-50 37 3 Stainless steel with thermal insulation
GS-100 60 4 Stainless steel with thermal insulation
Single effect evaporator system can applied in the following syrup production line:
(1) Corn glucose syrup production line
(2) Rice glucose syrup production line
(3) Wheat glucose syrup production line
(4) Cassava glucose syrup production line
(5) Potato glucose syrup production line
(6) Fructose syrup production line
Final production storage system Introduction
Only one function maintain the glucose syrup purity, easy to produce and transportation.
Technical parameter of Decarburization system:
Model Size/m3 Power/KW Remark
GS-20 15 3 Stainless steel with thermal insulation
GS-30 23 3 Stainless steel with thermal insulation
GS-50 37 3 Stainless steel with thermal insulation
GS-100 60 4 Stainless steel with thermal insulation
Glucose production from starch
We all know that glucose production from starch ,which is the famous technolgy in the world. Glucose production is using the corn starch /potato starch/ wheat starch/ rice starch etc as feeding material, With double ensyme method to produce glucose.
Below is process of glucose production from starch, and contains all the machine of glucose production from starch during the glucose syrup production:
1. Mixxing the starch with water in the mixing tank
(1) certian temperature water
(2) Special ensyme
(3) Keeping for certain time
2. Continuous spray liquefaction section
(1).Spray liquefaction: Heating all tanks by steam, then start Liquid ejectors and pumps. Delivery material continuously and evenly, and control flow by production capacity.
Flash evaporate material in Laminar flow tank, and keep temperature. Observe liquefaction effect.
(2).High temperature treatment: Send passed material to the second Liquid ejector, and keep temperature.
(3).Carry slurry to buffer tank by pump.
3.Saccharification section
Cooling syrup by Heat-exchanger, then send them to Saccharification tank (mixer and coil pipe are set in Saccharification tank. ) by Pumps., then add glucoamylase
4.Decolorization
Carry passed syrup into Decolorization tanks(mixer and coil pipe are set in Saccharification tank.) by pump. Decolor by Activated carbon
5.Filtration section
(1).Filter protein and Activated carbon by Plate-and-frame filter press machine.
(2).Carry away protein by Bottom slot for Plate-and-frame filter press machine
(3).Unclean syrup is sent to big buffer tanks by pump.
(4).Carry clean syrup into buffer tanks.
6. Ion exchange section
(1).Carry syrup into Ion exchange columns. Resin clean syrup in Ion exchange columns. Then carry clean syrup into buffer tanks.
(2).When Resin loses effect, stop carry syrup into Ion exchange columns, and change another Ion exchange column for work.
(3).Recover Resin: Using heat water to bush resin, then use acid fluid, and alkali fluid to bush Ion exchange columns till Resin has function.
7.Evaporation section
Evaporate syrup by Triple-concentrate of evaporator and Single-concentrate of evaporator. When syrup concentration is OK, shut down steam and stop evaporation. And carry syrup to Final-product storage tanks by Pumps.
Add contact
