Cassava starch processing machine-yam flour production machinery equipment-corn powder into glucose syrup making plant line machines manufacturers
Contact number:0086 371 26630769
starch machine logo
0086 371 26630769
banner3

Site:home > News > Industry News >

potato processing factor

Release Time:2019-05-21 12:03Author:sd888Source:https://www.cndamachines.com/

Any questions about the product can be communicated with us at any time!

Service Phone:0086 371 26630769
potato processing factory-interior design for potato starch processing factory machine -plan for potato flour processing plant
 
 
 potato starch production line includes (Raw material handling capacity per hour): 5 tons / hour, 10 tons / hour, 15 tons / hour, 20 tons / hour, 60 tons / hour, 100 tons / hour, 300 tons / hour.
 
DOING potato starch making machine is simple in structure and easy to operate, and the entire production line can be operated by just a few people. DOING engineers are also available for overseas to instruct the equipment installation, commissioning, and training of workers to use the equipment. Below we highlight several complex potato starch making machine.
Rasper: Rasper is a commonly used potato starch making machine used for potato grinding in modern potato starch processing plant. This equipment has high efficiency of grinding, high starch extraction rate and high output.
 
The principle of the potato starch making machine is very simple, that is, using a high-speed boring tool to break the potato to release the starch granules. The following matters should be paid attention to during operation in order to improve efficiency and extend the service life of the equipment.
 
The operator needs to pay attention to the motor temperature and machine sound during operation. If the sound of potato starch making machine suddenly becomes smaller, it means that there is too much material in the rasper, and the feeding amount should be reduced appropriately.
 
In the economic accounting of starch plants, water consumption and starch yield are two important indicators. DOING high efficient rasper can ensure high starch yield. As for water consumption, when using this potato starch making machine, in the process of adding water and using the return water, the water volume should be appropriate, too little water can not wash away the broken material, too much water will cause waste.
Hydrocyclone system: The protein content is a key indicator for testing the quality of starch. Excessive protein content will directly affect the use of starch. For example, in the case of glucose injection, if the starch with too high protein is used, there will be mildew and white spots, so the potato starch making machine used to reduce the protein content in starch is crucial.
 
Most of the starch produced by using the traditional method usually adapts the method of pool sedimentation to remove the protein, which takes up a large plant site and can not effectively remove protein impurities, which not only affects the quality of starch but also restricts the yield.
 
The potato starch making machine used for starch concentration and refining by Doing Company adopts the advanced hydrocyclone system of European process, which combines protein separation and starch washing in one. The working principle of the hydrocyclone system is to take use of the centrifugal force generated by the high-speed rotation of the cyclone tube to separate starch and protein impurities. Due to the yellow pulp and the starch has different gravity, so that the heavy material flows down the pipe wall and is discharged through the bottom flow port. The light material rotates upward at the center and is discharged by the upper overflow port.
tapioca processing machine, can help you to design and construct your tapioca flour plant, equipped with the complete set of equipment and the advanced tapioca flour extraction technology. The tapioca flour in most time called as potato starch, it's more and more popular in the world, widely used in industrial production. Next is Henan Doing Machinery supplied tapioca flour plant and the main tapioca flour processing machine introduction:
(1) Raw material receiving unit: The fresh tapioca is carried besides the storage pool after weighing. Firstly, it goes through the dry sieve for removing the stones and sand. Then the pre-cleaned tapioca falls on the belt conveyer and enters into the storage pool, then the rubbish will be carried away by truck.
 
(2) Water transport unit in the tapioca flour plant: The exit of the storage pool is water transportation channel. The tapioca will be sent by water force into de-stone machine. Meanwhile, the remaining sand and dirt will be again cleaned out by rolling and friction.
(3) De-stone and washing unit: Tapioca is transferred into the screw destone machine to be cleaned by water flow. The small sand and stone go through the rotary screen then meet with bigger size stone which was stopped and sent back to the entrance of de-stone machine. Most of sand and stone are removed out of de-stone machine adopted in the tapioca flour plant. The tapioca then goes into rotary cleaning machine for further removing of dirt and broken chips. Cleaned tapioca falls on a checking conveying belt equipped with nozzles for washing the surface of tapioca. 
 
potato procsssing machine
potato starch machine
potato flour machine

Please leave your contact information and we will respond to you immediately or send emal:sdsale@cnstarchmachine.com


Links:

All rights reserved: kaifeng sida company

ICP17042657-5